Monomer Liquid And Polymer Powder Should Not

Question: To shape the monomer liquid and polymer powder enhancement's free edge, you should:

Answer: Press and smooth the product with the belly of your sable brush

Question: When applying an acid-based nail primer, you should:​

Answer: Use a light dotting action to apply primer to the nail​

Question: When acid-free primer dries, it creates a _____ surface.

Answer: Shiny and sticky

Question: To dispose of small amounts of leftover monomer liquid, you should:

Answer: Wipe it out with a paper towel, seal it in a plastic bag, and dispose of it in a metal trash can

Question: When using monomer liquid and polymer powder, you should:

Answer: Dip the brush in the liquid and then in the powder

Question: The _____ is the area of the nail that has all of its strength.

Answer: Apex

Question: Monomer liquid and polymer powder are each poured into a special holder called a(n):

Answer: Dappen dish

Question: Nail dehydrators are used to remove surface moisture and oil on the natural nail plate in order to:

Answer: Improve adhesion

Question: You should maintain _____ if you want to be able to reproduce customized nail enhancements that clients cannot get from anyone else.

Answer: Recipe cards

Question: When applying an acid-free primer:

Answer: You should completely cover the nail plate with primer

Question: When monomer liquid is picked up by a brush and mixed with polymer powder, the bead that forms on the end of the brush:

Answer: Quickly begins to harden

Question: When using odorless monomer liquid, you should use a(n) _____ brush.

Answer: Flat

Question: The most commonly used brush for monomer liquid or polymer powder is a _____ brush.

Answer: #8 oval

Question: If equal amounts of liquid and powder are used to create a bead, it is called a _____ bead.

Answer: Dry

Question: The nail extension underside should:

Answer: Be smooth

Question: Nail enhancements created by combining a monomer liquid and a polymer powder are commonly called:

Answer: Sculptured nails

Question: A monomer is one unit called a(n):

Answer: Molecule

Question: Odorless products harden more slowly, which creates a tacky layer called the _____ layer.

Answer: Inhibition

Question: The amount of monomer liquid and polymer powder used to create a bead is called the:

Answer: Mix ratio

Question: Poly means

Answer: Many

Question: When you use twice as much liquid as powder to create a bead, it creates a _____ bead.

Answer: Wet

Question: You can tell that a monomer liquid and polymer powder nail enhancement is ready to be filed and shaped when you tap it with a brush handle and:

Answer: You hear a clicking sound

Question: After monomer liquid and polymer powder nail enhancements have been removed, the nail plates commonly appear to be:​

Answer: Thinner

Question: The _____ is where the natural nail grows beyond the finger and becomes the free edge.

Answer: Stress area

Question: Which product is used to chemically bond the enhancement product to the natural nail?

Answer: Nail primer

Question: Which term describes any art that protrudes from the nail?

Answer: 3-D nail art

Question: You should NOT use a medium-grit abrasive to:​

Answer: Create a high shine on a natural nail when no polish will be worn

Question: ​If you use too much powder when creating a bead, the

Answer: Nail enhancement may become discolored

Question: It would be appropriate to use a _____ -grit abrasive to shape the free edge and remove imperfections during a monomer liquid and polymer powder enhancement application.

Answer: 180

Question: Polymerization is also known as:

Answer: Curing

Question: A mix that has one-and-one-half times more liquid than powder is a _____ bead.

Answer: Medium

Question: Acid-free and nonacid nail primers have largely replaced primers that use:

Answer: Methacrylic acid

Question: Methyl methacrylate (MMA) products:​

Answer: Are extremely difficult to remove

Question: When applying monomer liquid and polymer powder nail enhancements, after dipping the brush in monomer liquid and removing the excess, you should:

Answer: Dip the same brush into the polymer powder and rotate it slightly​

Question: After an enhancement service, monomer liquid in the dappen dish should be:

Answer: Discarded

Question: After an enhancement service, you should wipe the dappen dish clean with:

Answer: Acetone

Question: The most commonly used versions of monomer liquid in the beauty industry are odorless monomer liquid and:

Answer: Ethyl methacrylate

Question: Applying nail enhancement product over wet nail primer can cause:

Answer: Product discoloration

Question: Monomer liquid and polymer powder should NOT:

Answer: Be applied under a nail tip

Question: What does a polymerization reaction do?

Answer: Create long polymer chains

Question: In the salon, a _____ C-curve is the average for monomer liquid and polymer powder nail enhancements.

Answer: 35-percent

Question: A(n) _____ is an additive in monomer liquid that is used to control the set or curing time of the product.

Answer: Catalyst

Question: Proper maintenance of monomer liquid and polymer powder nail enhancements should be performed every:

Answer: 2 to 3 weeks

Question: When applying monomer liquid and polymer powder nail enhancements, you should:

Answer: Leave a tiny free margin between the product placement and skin

Question: What type of bead should be used with odorless monomer liquid and polymer powder products?

Answer: Dry

Question: ​A _____ is used to thin enhancement product to prepare the enhancement for a refill or rebalance.

Answer: Coarse-grit abrasive

Question: The chemical reaction that creates polymers is called:

Answer: Polymerization

Question: The _____ runs straight from the cuticle down the side of the nail to the end of the extension.​

Answer: Sidewall

Question: Monomer liquid and polymer powder should be stored in a:

Answer: Cool, dark area

Question: When repairing a crack in monomer liquid and polymer powder enhancements, you should remove the existing polish, push back the eponychium, remove cuticle tissue, gently file the nail, and then:

Answer: File a V-shape into the crack

Question: After buffing the nail plate to remove shine, you should remove the nail dust with:

Answer: A clean dry nail brush

Question: In general, the ideal mix ratio for working with monomer liquids and polymer powders is:

Answer: Medium beads

Question: The initiator that is added to polymer powder to start the chain reaction of curing is:

Answer: Benzoyl peroxide

Question: What starts a chain reaction that leads to the creation of very long polymer chains?

Answer: Initiator

Question: Pre-shaped plastic or aluminum enhancements used as a guide to extend nail enhancements beyond the fingertip for

additional length are called:

Answer: Multi-use nail forms