Monomer Liquid And Polymer Powder Should Not
Question: To shape the monomer liquid and polymer powder enhancement's free edge, you should:
Answer: Press and smooth the product with the belly of your sable brush
Question: When applying an acid-based nail primer, you should:
Answer: Use a light dotting action to apply primer to the nail
Question: When acid-free primer dries, it creates a _____ surface.
Answer: Shiny and sticky
Question: To dispose of small amounts of leftover monomer liquid, you should:
Answer: Wipe it out with a paper towel, seal it in a plastic bag, and dispose of it in a metal trash can
Question: When using monomer liquid and polymer powder, you should:
Answer: Dip the brush in the liquid and then in the powder
Question: The _____ is the area of the nail that has all of its strength.
Answer: Apex
Question: Monomer liquid and polymer powder are each poured into a special holder called a(n):
Answer: Dappen dish
Question: Nail dehydrators are used to remove surface moisture and oil on the natural nail plate in order to:
Answer: Improve adhesion
Question: You should maintain _____ if you want to be able to reproduce customized nail enhancements that clients cannot get from anyone else.
Answer: Recipe cards
Question: When applying an acid-free primer:
Answer: You should completely cover the nail plate with primer
Question: When monomer liquid is picked up by a brush and mixed with polymer powder, the bead that forms on the end of the brush:
Answer: Quickly begins to harden
Question: When using odorless monomer liquid, you should use a(n) _____ brush.
Answer: Flat
Question: The most commonly used brush for monomer liquid or polymer powder is a _____ brush.
Answer: #8 oval
Question: If equal amounts of liquid and powder are used to create a bead, it is called a _____ bead.
Answer: Dry
Question: The nail extension underside should:
Answer: Be smooth
Question: Nail enhancements created by combining a monomer liquid and a polymer powder are commonly called:
Answer: Sculptured nails
Question: A monomer is one unit called a(n):
Answer: Molecule
Question: Odorless products harden more slowly, which creates a tacky layer called the _____ layer.
Answer: Inhibition
Question: The amount of monomer liquid and polymer powder used to create a bead is called the:
Answer: Mix ratio
Question: Poly means
Answer: Many
Question: When you use twice as much liquid as powder to create a bead, it creates a _____ bead.
Answer: Wet
Question: You can tell that a monomer liquid and polymer powder nail enhancement is ready to be filed and shaped when you tap it with a brush handle and:
Answer: You hear a clicking sound
Question: After monomer liquid and polymer powder nail enhancements have been removed, the nail plates commonly appear to be:
Answer: Thinner
Question: The _____ is where the natural nail grows beyond the finger and becomes the free edge.
Answer: Stress area
Question: Which product is used to chemically bond the enhancement product to the natural nail?
Answer: Nail primer
Question: Which term describes any art that protrudes from the nail?
Answer: 3-D nail art
Question: You should NOT use a medium-grit abrasive to:
Answer: Create a high shine on a natural nail when no polish will be worn
Question: If you use too much powder when creating a bead, the
Answer: Nail enhancement may become discolored
Question: It would be appropriate to use a _____ -grit abrasive to shape the free edge and remove imperfections during a monomer liquid and polymer powder enhancement application.
Answer: 180
Question: Polymerization is also known as:
Answer: Curing
Question: A mix that has one-and-one-half times more liquid than powder is a _____ bead.
Answer: Medium
Question: Acid-free and nonacid nail primers have largely replaced primers that use:
Answer: Methacrylic acid
Question: Methyl methacrylate (MMA) products:
Answer: Are extremely difficult to remove
Question: When applying monomer liquid and polymer powder nail enhancements, after dipping the brush in monomer liquid and removing the excess, you should:
Answer: Dip the same brush into the polymer powder and rotate it slightly
Question: After an enhancement service, monomer liquid in the dappen dish should be:
Answer: Discarded
Question: After an enhancement service, you should wipe the dappen dish clean with:
Answer: Acetone
Question: The most commonly used versions of monomer liquid in the beauty industry are odorless monomer liquid and:
Answer: Ethyl methacrylate
Question: Applying nail enhancement product over wet nail primer can cause:
Answer: Product discoloration
Question: Monomer liquid and polymer powder should NOT:
Answer: Be applied under a nail tip
Question: What does a polymerization reaction do?
Answer: Create long polymer chains
Question: In the salon, a _____ C-curve is the average for monomer liquid and polymer powder nail enhancements.
Answer: 35-percent
Question: A(n) _____ is an additive in monomer liquid that is used to control the set or curing time of the product.
Answer: Catalyst
Question: Proper maintenance of monomer liquid and polymer powder nail enhancements should be performed every:
Answer: 2 to 3 weeks
Question: When applying monomer liquid and polymer powder nail enhancements, you should:
Answer: Leave a tiny free margin between the product placement and skin
Question: What type of bead should be used with odorless monomer liquid and polymer powder products?
Answer: Dry
Question: A _____ is used to thin enhancement product to prepare the enhancement for a refill or rebalance.
Answer: Coarse-grit abrasive
Question: The chemical reaction that creates polymers is called:
Answer: Polymerization
Question: The _____ runs straight from the cuticle down the side of the nail to the end of the extension.
Answer: Sidewall
Question: Monomer liquid and polymer powder should be stored in a:
Answer: Cool, dark area
Question: When repairing a crack in monomer liquid and polymer powder enhancements, you should remove the existing polish, push back the eponychium, remove cuticle tissue, gently file the nail, and then:
Answer: File a V-shape into the crack
Question: After buffing the nail plate to remove shine, you should remove the nail dust with:
Answer: A clean dry nail brush
Question: In general, the ideal mix ratio for working with monomer liquids and polymer powders is:
Answer: Medium beads
Question: The initiator that is added to polymer powder to start the chain reaction of curing is:
Answer: Benzoyl peroxide
Question: What starts a chain reaction that leads to the creation of very long polymer chains?
Answer: Initiator
Question: Pre-shaped plastic or aluminum enhancements used as a guide to extend nail enhancements beyond the fingertip for
additional length are called:
Answer: Multi-use nail forms